Root Treatment For Samsung Galaxy Beam (I8530)

How To Gain Root Access On Samsung Galaxy Beam – Don’t get so easy to be satisfied with your current phone. You can unleash more potential abilities of your phone by gaining root access on it. In this page, we’ll show you how to root Samsung I8530 aka Galaxy Beam which is a decent Android phone comes powered with Dual-core 1GHz Cortex-A9 processor, Mali-400 GPU, NovaThor U8500 chipset and 758MB of RAM to run and render Android OS on its 4.0 inches (~233 ppi pixel density) display with resolutions of 480 x 800 pixels.

Section 1: Preparation

- Make sure your phone has at least 75% battery power
– Backup everything you feel important (How to backup)
– Be understand that rooting will void your warranty
– We hold no responsibility of any damage caused
– Download and install needed drivers software here.
– Download Odin v1.85 (Odin download page)
– Download needed rooting Kernel file here.
– Unzip / extract Odin to Desktop
– Place Beam-root-Kernel.tar file also in Desktop

rooted galaxy beam

Section 2: How To Root

1- Launch Odin tool up.

2- Now turn your phone OFF.

3- Reboot your phone into “Download Mode”, to do that..

Press and hold Volume DOWN + Home + Power buttons all together at once.

4- Once you’re in Download Mode, connect your phone to PC

5- Click the PDA tab in Odin

6- Find and locate Beam-root-Kernel.tar file (in Desktop)

7- Once done, simply hit the “Start” button in Odin

8- Sit tight and wait for Odin to do its job

9- Once done, your phone should reboot automatically

10- That’s it and your Galaxy Beam is now rooted.

You can confirm that by downloading and installing root-only apps from Google Play Store. Once again Odin be a hero for all users of Samsung phones. But do not forget to say thanks to shabbypenguin for sharing the method as well as all necessary files. You can do that here but you can also find more queries there.

Section 3: How To Unroot?

Have fun enough with your rooted device? Do you want to bring it back from root state to unrooted? That’s will be easy as well. All you have to do is just download the Stock firmware for your phone, then use Odin to flash it over.

1- Download needed Stock firmware file here.

2- Extract the downloaded Stock firmware in Desktop

3- Now launch Odin tool up

4- Reboot your phone into “Download Mode”, to do that..

Press and hold Volume DOWN + Home + Power buttons all together at once.

5- Once you are in Download Mode, connect your phone to PC

6- In Odin, select appropriate files as below..

PDA >> Select the file having CODE in its name

PHONE >> Select the file having MODEM in its name

CSC >> Select the file having CSC in its name

7- Make sure only “Auto Reboot” and “F. Reset Time” boxes are checked in the Odin, while everything else leave it unchecked

8- Once you make sure all is set, hit the “Start” button

9- Sit tight and wait for Odin to do its job

10- Once done, your phone should reboot automagically

That’s it. Your Galaxy Beam is now unrooted. Enjoy..

Subscribe

Thanks for reading articles on PressByte.com. You can get updates quicker via email. Subscribe freely below.

No Responses

Leave a Reply